English
Chinese
Japanese
Korean
Russian
The LIS2DW12TR is a three-axis digital accelerometer that is a 3D digital accelerometer in a system-level package (SiP). It has a digital I2C/SPI serial port standard output, which can be converted by formula to get accurate X, Y, Z axis acceleration values. Its main features include:
1. Measurement range is optional, ±2g, ±4g, ±8g and ±16g.
2. The output data rate ranges from 1.6 Hz to 1600 Hz.
3. The output data is 14 or 12 bits (positive or negative value).
4. Built-in 12-bit or 8-bit temperature sensor.
5. Pin introduction: regardless of I2C or SPI interface, LIS2DW12TR is used as a slave machine. If the design uses an I2C interface, the SCL and SDA pins require an external 10K pull-up resistor. VDD is the kernel power supply, VDD_IO is the pin power supply, and the power filter capacitor should be placed close to the pin.
6. Easy to use, good compatibility.
In addition, LIS2DW12TR has the following technical parameters:
1. Sensing axis: X, Y, Z
2. Acceleration: 2 g, 4 g, 8 g, 16 g
3. Sensitivity: 1.952mg /digit, 7.808mg /digit
4. Output type: Digital
5. Interface type: I2C, SPI
6 Resolution: 16 bit
For more information about the LIS2DW12TR, it is recommended to visit the electronic component supplier's website or contact the manufacturer.
